56
ICAR PG Agricultural Engineering 29 Jun 2024Shift 1
MCQ (Single Correct) +4 −1
The resultant soil thrust and radial force acting on each gang of a single acting disc harrow are 1200 N and 600 N respectively. The resultant downward force acting on each gang is 2400 N. The perpendicular distance of the soil thrust from the gang axis is 20 cm. What is the distance between line of action of downward force and centre of the gang to get a uniform depth of cut?
एक सिंगल एक्टिंग डिस्क हैरो के प्रत्येक गैंग पर कार्य करने वाला परिणामी मृदा प्रणोद (soil thrust) और रेडियल बल क्रमशः 1200 N और 600 N है। प्रत्येक गैंग पर कार्य करने वाला परिणामी नीचे की ओर बल (downward force) 2400 N है। गैंग अक्ष से मृदा प्रणोद की लंबवत दूरी 20 सेमी है। कटाई की एकसमान गहराई (uniform depth of cut) प्राप्त करने के लिए नीचे की ओर लगने वाले बल की क्रिया रेखा और गैंग के केंद्र के बीच की दूरी क्या होगी?
57
ICAR PG Agricultural Engineering 29 Jun 2024Shift 1
MCQ (Single Correct) +4 −1
An inclined blade tillage tool of 25 cm wide and 10 cm long is operating at 25 cm depth in cohesionless soil with density equal to \(1.25\text{ g}\cdot\text{cm}^{-3}\) and angle of internal friction of 39°. The normal load on the tool and coefficient of soil-metal friction are 1000 N and 0.3, respectively. The soil cutting resistance per unit length of cutting edge is \(25\text{ N}\cdot\text{mm}^{-1}\). If the tool lift angle is 30°, the specific draft will be: [Given: \(\cos 30^\circ = 0.866\)]
25 सेमी चौड़ा और 10 सेमी लंबा एक झुका हुआ ब्लेड जुताई उपकरण 39° के आंतरिक घर्षण कोण और \(1.25\text{ g/cm}^3\) घनत्व वाली संसंजनहीन मृदा में 25 सेमी की गहराई पर काम कर रहा है। उपकरण पर सामान्य भार और मृदा-धातु घर्षण का गुणांक क्रमशः 1000 N और 0.3 है। काटने वाले किनारे की प्रति इकाई लंबाई पर मिट्टी काटने का प्रतिरोध \(25\text{ N/mm}\) है। यदि उपकरण लिफ्ट कोण 30° है, तो विशिष्ट ड्राफ्ट (specific draft) क्या होगा? [दिया गया है: \(\cos 30^\circ = 0.866\)]
58
ICAR PG Agricultural Engineering 29 Jun 2024Shift 1
MCQ (Single Correct) +4 −1
During testing of a thresher, \(100\text{ N}\cdot\text{m}\) torque is recorded at 600 rpm at the main shaft of threshing cylinder. The diameter of threshing cylinder is 140 mm. The cylinder is operated by a V-pulley and unit mass of v-belt is \(1.0\text{ kg}\cdot\text{m}^{-1}\). What will be the maximum tension in the v-belt at the condition of maximum power transmission?
एक थ्रेशर के परीक्षण के दौरान थ्रेशिंग सिलेंडर के मुख्य शाफ्ट पर 600 rpm पर \(100\text{ N}\cdot\text{m}\) टॉर्क दर्ज किया जाता है। थ्रेशिंग सिलेंडर का व्यास 140 मिमी है। सिलेंडर एक V-पुली द्वारा संचालित होता है और V-बेल्ट का इकाई द्रव्यमान \(1.0\text{ kg/m}\) है। अधिकतम शक्ति संचरण की स्थिति में V-बेल्ट में अधिकतम तनाव (maximum tension) क्या होगा?
59
ICAR PG Agricultural Engineering 29 Jun 2024Shift 1
MCQ (Single Correct) +4 −1
The output capacity and cleaning efficiency of a wheat thresher at an optimal operating condition are \(600\text{ kg}\cdot\text{h}^{-1}\) and 99%, respectively. The grain-straw ratio of the crop is 2:1. If the grain recovery at main grain outlet is 100%, the throughput capacity will be:
इष्टतम परिचालन स्थिति में गेहूं के थ्रेशर की आउटपुट क्षमता और सफाई दक्षता क्रमशः \(600\text{ kg/h}\) और 99% है। फसल का अनाज-भूसा अनुपात (grain-straw ratio) 2:1 है। यदि मुख्य अनाज आउटलेट पर अनाज की रिकवरी 100% है, तो थ्रूपुट क्षमता (throughput capacity) क्या होगी?
60
ICAR PG Agricultural Engineering 29 Jun 2024Shift 1
MCQ (Single Correct) +4 −1
The soil forces acting upon a mouldboard plough bottom resulting from the operations of cutting, pulverising, lifting, and inverting the furrow slice are 2.2 kN, 1.0 kN, and 0.8 kN along longitudinal, transverse, and vertical directions, respectively. The coefficient of soil-metal friction in the friction phase is 0.3. What will be the estimated draft, neglecting the effects of weight of the implement and the vertical reaction?
मिट्टी की फांक को काटने, भुरभुरा करने, उठाने और पलटने के कार्यों से मोल्डबोर्ड हल के बॉटम पर कार्य करने वाले मृदा बल अनुदैर्ध्य (longitudinal), अनुप्रस्थ (transverse) और ऊर्ध्वाधर (vertical) दिशाओं में क्रमशः 2.2 kN, 1.0 kN और 0.8 kN हैं। घर्षण चरण में मृदा-धातु घर्षण का गुणांक 0.3 है। उपकरण के वजन और ऊर्ध्वाधर प्रतिक्रिया के प्रभावों की उपेक्षा करते हुए, अनुमानित ड्राफ्ट (estimated draft) क्या होगा?
Official PYQ Papers

Previous Year Papers of Agricultural Engineering and Technology

Practice official shift-wise question papers with answer keys and detailed explanations on the actual exam pattern.

3
Total Available Previous Papers

Choose Exam

Exam Directory

Browse official Previous papers and mock tests

10 Major Agriculture Exams Available