At 0 °C, water forms an open hexagonal ice lattice with lower density (approx. 0.917 g/cm3).
Due to the anomalous expansion of water, the open tetrahedral hydrogen-bonded structure begins collapsing upon melting, reaching its maximum physical density of exactly 1.0000 g/cm3 at 3.98 °C (~4 °C) before thermal expansion begins to dominate.
At 100 °C, water density decreases to ~0.958 g/cm3.
At 25 °C, water density is ~0.997 g/cm3.
Hence, the correct option is (B).
0 °C पर जल बर्फ के रूप में कम घनत्व रखता है।
जल के असामान्य प्रसार (Anomalous expansion) के कारण, जल का 'अधिकतम घनत्व' (1.000 ग्राम/सेमी3) '4 °C' (3.98 °C) तापमान पर होता है।
100 °C पर जल का घनत्व काफी कम हो जाता है।
25 °C पर घनत्व लगभग 0.997 g/cm3 होता है।
अतः सही विकल्प (B) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Q.17
RPSC Agriculture Research Officer (Agriculture Chemistry) - 2011
Laterization (desilication) leaches silica out of the profile, concentrating iron and aluminium sesquioxides in the upper soil.
In Podzolization, sesquioxides (Fe and Al oxides) and humus are chelated and eluviated from the upper mineral E horizon downward into the B horizon, leaving behind a highly bleached albic horizon characterized by a residual concentration of pure, resistant free silica (quartz).
Calcification accumulates calcium carbonate.
Gleization accumulates reduced ferrous iron under waterlogged conditions.
Hence, the correct option is (B).
लैटेराइजेशन में सिलिका का निक्षालन हो जाता है तथा लोहा व एल्युमिनियम ऊपर शेष रहते हैं।
'पोडजोलाइजेशन' (Podzolization) वह मृदा निर्माण प्रक्रिया है जिसमें अम्लीय निक्षालन के कारण ऊपरी संस्तर (E संस्तर) से लोहा, एल्युमिनियम व ह्यूमस नीचे चले जाते हैं तथा ऊपर केवल प्रतिरोधी 'मुक्त सिलिका' (क्वार्ट्ज) का सांद्रण शेष रह जाता है।
कैल्सीफिकेशन में कैल्शियम कार्बोनेट का संचयन होता है।
ग्लेलाइजेशन में अपचयित लौह यौगिक बनते हैं।
अतः सही विकल्प (B) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Q.18
RPSC Agriculture Research Officer (Agriculture Chemistry) - 2011
X-ray emission is an extra-nuclear atomic phenomenon produced when inner-shell orbital electrons transition to lower energy levels (or through Bremsstrahlung deceleration of electrons outside the nucleus); it does not originate from within the atomic nucleus.
Alpha particle emission (helium nuclei) originates from radioactive nuclear decay.
Beta particle emission (conversion of a neutron to proton or vice-versa) originates inside the nucleus.
Gamma emission represents de-excitation photons emitted from excited nuclear energy states.
Hence, the correct option is (A).
'एक्स-किरण उत्सर्जन' (X-ray emission) एक बाह्य-नाभिकीय (इलेक्ट्रॉनिक) घटना है, जो परमाणु की आंतरिक कक्षाओं में इलेक्ट्रॉनों के संक्रमण या मंदन से उत्पन्न होती है, इसका उद्गम नाभिक से नहीं होता है।
अल्फा-कण उत्सर्जन परमाणु के नाभिक से होता है।
बीटा-कण उत्सर्जन नाभिक में न्यूट्रॉन/प्रोटॉन के रूपांतरण से होता है।
गामा किरणें उत्तेजित नाभिक से उत्सर्जित होती हैं।
अतः सही विकल्प (A) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Q.19
RPSC Agriculture Research Officer (Agriculture Chemistry) - 2011
In Gouy-Chapman double layer theory, double layer thickness (1/kappa) is inversely proportional to cation valence (z) and square root of electrolyte concentration; because Monovalent cations (like Na+) have low valence (z = 1) and large hydrated radii, they compress the layer weakly, drastically increasing diffuse double layer thickness and causing soil dispersion.
Divalent cations compress the double layer, promoting flocculation.
Trivalent cations strongly collapse and compress the diffuse double layer.
Higher valence cations cause severe compression.
Hence, the correct option is (A).
गॉउ-चैपमैन सिद्धांत के अनुसार विसरित दोहरी परत की मोटाई धनायन की संयोजकता के व्युत्क्रमानुपाती होती है; 'एक-संयोजक धनायनों' (Monovalent cations, जैसे Na+) की संयोजकता (z=1) न्यूनतम होने से ये ऋणावेशित सतह से दूर तक फैले रहते हैं, जिससे 'दोहरी परत की मोटाई सर्वाधिक बढ़ जाती है' और मृदा का परिक्षेपण (Dispersion) होता है।
द्वि-संयोजक धनायन परत की मोटाई घटाते हैं।
त्रि-संयोजक धनायन परत को अत्यधिक संपीड़ित कर देते हैं।
उच्च संयोजकता मोटाई को कम करती है।
अतः सही विकल्प (A) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Q.20
RPSC Agriculture Research Officer (Agriculture Chemistry) - 2011
Clayey soils have lower thermal conductivity due to higher porosity, smaller particle contact points, and lower intrinsic mineral conductivity.
Silty loam soils have intermediate thermal conductivity.
Sandy soils consist predominantly of quartz mineral grains, which have a very high intrinsic thermal conductivity (~8.8 W/m/K, roughly three times higher than clay minerals); combined with lower total porosity, sandy soils exhibit the highest bulk thermal conductivity among mineral soils.
Clay loam soils have lower thermal conductivity than sandy soils.
Hence, the correct option is (C).
चिकनी मृदा में रंध्रावकाश अधिक होने तथा क्ले खनिजों की चालकता कम होने से तापीय चालकता कम होती है।
सिल्टी दोमट की चालकता मध्यम होती है।
'बलुई मृदा' (Sandy soils) में क्वार्ट्ज खनिज की प्रधानता होती है जिसकी स्वाभाविक तापीय चालकता (लगभग 8.8 W/m/K) अन्य क्ले खनिजों से तीन गुना अधिक होती है; अतः समान परिस्थितियों में बलुई मृदा की 'तापीय चालकता सर्वाधिक' होती है।
क्ले दोमट की चालकता बालू से कम होती है।
अतः सही विकल्प (C) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Report Issue / Suggest Correctionत्रुटि रिपोर्ट / संशोधन सुझाव
No official replies published yet for this questionइस प्रश्न पर अभी कोई आधिकारिक समाधान प्रकाशित नहीं है
Have an objection, typo, or doubt? Submit a report in Tab 1. Our subject experts will audit the question and publish the official resolution here.यदि आपको इस प्रश्न या उत्तर कुंजी में कोई आपत्ति है, तो 'त्रुटि रिपोर्ट' टैब से विवरण भेजें। हमारी विषय विशेषज्ञ टीम समीक्षा कर आधिकारिक समाधान प्रकाशित करेगी।