Ohm's law governs electrical current flow through a conductor driven by voltage gradient.
Fick's law describes the diffusion of solutes driven by concentration gradient.
Fourier's law governs heat conduction through a medium driven by temperature gradient.
Darcy's Law (Henry Darcy, 1856: q = -K * dH/dL) is the fundamental physical law governing fluid (water) flow and flux through porous media like soils driven by hydraulic gradient.
Hence, the correct option is (D).
ओम का नियम विद्युत धारा प्रवाह से संबंधित है।
फिक का नियम विलेय कणों के विसरण से संबंधित है।
फूरियर का नियम ऊष्मा चालन से संबंधित है।
मृदा जैसे रंध्री माध्यम में जल प्रवाह का अध्ययन 'डार्सी के नियम' (Darcy's Law - q = -K * dH/dL) द्वारा किया जाता है, जो जल प्रवाह की दर को हाइड्रोलिक प्रवणता से जोड़ता है।
अतः सही विकल्प (D) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
80 Cal/g is the latent heat of fusion (melting of ice) of water.
70 Cal/g is incorrect.
340 Cal/g is incorrect.
The latent heat of vaporization of water at 100 °C is approximately 539 to 540 Cal/g (approx. 2256 J/g), representing the thermal energy required to convert 1 gram of liquid water into vapor without temperature change.
Hence, the correct option is (D).
80 कैलोरी/ग्राम बर्फ के गलन की गुप्त ऊष्मा है।
70 कैलोरी/ग्राम अमान्य है।
340 कैलोरी/ग्राम अमान्य है।
100 °C पर जल के वाष्पीकरण की गुप्त ऊष्मा (Latent heat of vaporization) लगभग '540 कैलोरी/ग्राम' (539-540 Cal/g या 2256 जूल/ग्राम) होती है।
अतः सही विकल्प (D) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Clayey soils have lower thermal conductivity due to higher porosity, smaller particle contact points, and lower intrinsic mineral conductivity.
Silty loam soils have intermediate thermal conductivity.
Sandy soils consist predominantly of quartz mineral grains, which have a very high intrinsic thermal conductivity (~8.8 W/m/K, roughly three times higher than clay minerals); combined with lower total porosity, sandy soils exhibit the highest bulk thermal conductivity among mineral soils.
Clay loam soils have lower thermal conductivity than sandy soils.
Hence, the correct option is (C).
चिकनी मृदा में रंध्रावकाश अधिक होने तथा क्ले खनिजों की चालकता कम होने से तापीय चालकता कम होती है।
सिल्टी दोमट की चालकता मध्यम होती है।
'बलुई मृदा' (Sandy soils) में क्वार्ट्ज खनिज की प्रधानता होती है जिसकी स्वाभाविक तापीय चालकता (लगभग 8.8 W/m/K) अन्य क्ले खनिजों से तीन गुना अधिक होती है; अतः समान परिस्थितियों में बलुई मृदा की 'तापीय चालकता सर्वाधिक' होती है।
क्ले दोमट की चालकता बालू से कम होती है।
अतः सही विकल्प (C) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Darcy's law governs liquid water flux through porous media.
Fick's law governs the diffusion of chemical solutes and gases.
Fourier's Law of Heat Conduction (qh = -k * dT/dx) states that the conductive heat flux (qh) through a medium is directly proportional to the negative thermal gradient (dT/dx) and thermal conductivity (k), forming the foundational equation of soil thermal physics.
Ohm's law governs electrical current flow.
Hence, the correct option is (C).
डार्सी का नियम जल प्रवाह से संबंधित है।
फिक का नियम विसरण से संबंधित है।
मृदा में ऊष्मा चालन एवं ऊष्मा प्रवाह का अध्ययन 'फूरियर के नियम' (Fourier's Law - qh = -k * dT/dx) द्वारा किया जाता है, जो ऊष्मा प्रवाह को तापमान प्रवणता के समानुपाती दर्शाता है।
ओम का नियम विद्युत चालन का नियम है।
अतः सही विकल्प (C) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Porosity is the ratio of total pore volume (air + water) to total bulk volume of soil.
The ratio of the volume of air-filled pores (Va) to the total bulk volume of soil (Vb) at a given moisture content (typically at field capacity) is pedologically defined as the Air-Filled Capacity (or air capacity of the soil, theta_a = Va / Vb).
Aeration porosity represents macroporosity draining under -10 to -33 kPa suction.
Bulk density is the ratio of dry soil mass to bulk volume.
Hence, the correct option is (B).
रंध्रता कुल रंध्र आयतन व कुल मृदा आयतन का अनुपात है।
किसी निश्चित नमी स्तर (क्षेत्र क्षमता) पर मृदा में उपस्थित 'वायु के आयतन (Va) तथा मृदा के कुल आयतन (V)' के अनुपात को मृदा की 'वायु भरण क्षमता' (Air filled capacity / Air capacity) कहा जाता है।
वातन रंध्रता वृहद रंध्रों के प्रतिशत को दर्शाती है।
आभासी (स्थूल) घनत्व शुष्क मृदा भार व आयतन का अनुपात है।
अतः सही विकल्प (B) है।
Explanation not matching this question?क्या व्याख्या इस प्रश्न से मेल नहीं खा रही?Report
Report Issue / Suggest Correctionत्रुटि रिपोर्ट / संशोधन सुझाव
No official replies published yet for this questionइस प्रश्न पर अभी कोई आधिकारिक समाधान प्रकाशित नहीं है
Have an objection, typo, or doubt? Submit a report in Tab 1. Our subject experts will audit the question and publish the official resolution here.यदि आपको इस प्रश्न या उत्तर कुंजी में कोई आपत्ति है, तो 'त्रुटि रिपोर्ट' टैब से विवरण भेजें। हमारी विषय विशेषज्ञ टीम समीक्षा कर आधिकारिक समाधान प्रकाशित करेगी।