Physics Full Subject Test

Electronics & Communication

Start Practice → अभ्यास शुरू करें →
5 Questions / Batch 5 प्रश्न / बैच
19
Total Questions कुल प्रश्न
2022 – 2025
4 Papers
Papers Covered कुल पेपर्स
4 Exam Years 4 परीक्षा वर्ष
6.0%
Exam Weightage परीक्षा वेटेज
In 2025 Exam 2025 परीक्षा में
2 Chapters
Syllabus Chapters पाठ्यक्रम अध्याय
4 Question Types 4 प्रश्न प्रकार
Question Types: प्रश्न प्रकार:
MCQ (Single Correct) MCQ (एकल सही) 11 Match the Following सूची मिलान 4 Arranging Order क्रम व्यवस्था 2 Numerical संख्यात्मक 2

Previous Years Questions (PYQ) Statistics विगत वर्षों के प्रश्न (PYQ) सांख्यिकी

Year-wise question count, paper frequency, and exam weightage percentage for Electronics & Communication: Electronics & Communication हेतु वर्षवार प्रश्नों की संख्या, पेपर आवृत्ति और परीक्षा वेटेज प्रतिशत:

Year वर्ष Questions प्रश्न Avg / Paper औसत / पेपर Weightage & Trend वेटेज व ट्रेंड
2025 3 Qs 3.0
6.0% —
2024 3 Qs 3.0
6.0% ↓ -6.0%
2023 6 Qs 6.0
12.0% ↓ -2.0%
2022 7 Qs 7.0
14.0% —

All Questions in this Subject इस विषय के सभी प्रश्न

19 Questions 19 प्रश्न
1

Below given are some statements about electronic devices:

(A) Diodes can be used for rectifying an ac voltage.
(B) For semiconductors, band gap energy $E_g > 3\,\text{eV}$.
(C) By changing the external applied voltage, junction barriers can be changed.
(D) p-n junction is the 'key' to all semiconductor devices.

Choose the correct answer from the options given below:

इलेक्ट्रॉनिक युक्तियों के विषय में नीचे कुछ कथन दिए गए हैं:

(A) डायोड का उपयोग ac वोल्टता के दिष्टीकरण के लिए किया जा सकता है।
(B) अर्धचालकों के लिए ऊर्जा बैंड अंतराल $E_g > 3\,\text{eV}$ होता है।
(C) बाह्य प्रयुक्त वोल्टता को परिवर्तित करके, संधि प्राचीर को बदला जा सकता है।
(D) p-n संधि सभी अर्धचालक युक्तियों की 'कुंजी' (आधार) है।

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 13-05-2025 Shift 2 MCQ (Single Correct) +5 / −1
2
On connecting a device X in a series circuit with a battery and a resistor, a current passes through the circuit. On reversing the polarity of the battery, the current in the circuit drops to almost zero. The device X may be a:
एक युक्ति X को एक बैटरी और एक प्रतिरोधक के साथ श्रेणीक्रम परिपथ में जोड़ने पर परिपथ में धारा प्रवाहित होती है। बैटरी की ध्रुवता उलटने पर परिपथ में धारा घटकर लगभग शून्य हो जाती है। युक्ति X हो सकती है:
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 13-05-2025 Shift 2 MCQ (Single Correct) +5 / −1
3

Which of the following statement(s) is/are true for p-type semiconductors?

(A) Holes are minority carriers and pentavalent atoms are the dopants.
(B) Electrons are majority carriers and trivalent atoms are the dopants.
(C) Holes are majority carriers and trivalent atoms are the dopants.
(D) Electrons are minority carriers and pentavalent atoms are the dopants.

Choose the correct answer from the options given below:

p-प्रकार के अर्धचालकों के लिए निम्नलिखित में से कौन-सा/से कथन सत्य है/हैं?

(A) कोटर (holes) अल्पसंख्यक वाहक हैं और पंचसंयोजी परमाणु अपमिश्रक हैं।
(B) इलेक्ट्रॉन बहुसंख्यक वाहक हैं और त्रिसंयोजी परमाणु अपमिश्रक हैं।
(C) कोटर (holes) बहुसंख्यक वाहक हैं और त्रिसंयोजी परमाणु अपमिश्रक हैं।
(D) इलेक्ट्रॉन अल्पसंख्यक वाहक हैं और पंचसंयोजी परमाणु अपमिश्रक हैं।

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए:

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 13-05-2025 Shift 2 MCQ (Single Correct) +5 / −1
4

Silicon can be doped using one of the following elements as dopant:

(A) Arsenic
(B) Indium
(C) Phosphorus
(D) Boron To get an n-type semiconductor, the dopants that can be used are ___________________.

सिलिकॉन का निम्नलिखित अपमिश्रकों (डोपेंट्स) से मादन (डोपिंग) किया जा सकता है:

(A) आर्सेनिक
(B) इंडियम
(C) फॉस्फोरस
(D) बोरॉन n-प्रकार का अर्धचालक प्राप्त करने के लिए जिन अपमिश्रकों का उपयोग किया जा सकता है, वे ___________ हैं।
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 16-05-2024 Shift 3 MCQ (Single Correct) +5 / −1
5
Given below are V versus I graphs for different types of p-n junction diodes marked A, B, C and D:

The correct sequence of graphs corresponding to forward biased p-n junction; Zener diode; Photodiode; and Solar cell in order is ____________

Fill in the blank with the correct answer from the options given below:
नीचे विभिन्न प्रकार के p-n जंक्शन डायोड के लिए V के सापेक्ष I ग्राफ (A), (B), (C) और (D) दिए गए हैं:

अग्र अभिनत p-n जंक्शन; जेनर डायोड; फोटो डायोड; और सौर सेल के संगत ग्राफों का सही क्रम _________ है:

नीचे दिए गए विकल्पों में से सही उत्तर का चयन कीजिए:

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 16-05-2024 Shift 3 MCQ (Single Correct) +5 / −1
6
For a full wave rectifier, if the input frequency is $50\,\text{Hz}$, the output frequency will be ___________.
पूर्ण तरंग दिष्टकारी (full wave rectifier) के लिए, यदि इनपुट आवृत्ति $50\,\text{Hz}$ है, तो आउटपुट आवृत्ति ___________ होगी।
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 16-05-2024 Shift 3 MCQ (Single Correct) +5 / −1
7
Which of the following statements is NOT correct?
निम्नलिखित में से कौन-सा कथन सही नहीं है?
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 02-07-2023 Shift 3 MCQ (Single Correct) +5 / −1
8
Identify the logic operation carried out by the following circuit:

Logic gate circuit
निम्नलिखित परिपथ द्वारा संपन्न होने वाले तार्किक (लॉजिक) प्रचालन की पहचान कीजिए:

Logic gate circuit
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 02-07-2023 Shift 3 MCQ (Single Correct) +5 / −1
9
In the figure, the potential difference between $A$ and $B$ is:

Resistor and diode circuit
चित्र में, $A$ और $B$ के बीच विभवांतर है:

Resistor and diode circuit
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 02-07-2023 Shift 3 Numerical +5 / −1
10
Match List I with List II:

List I
Device
List II
Application
A. Zener DiodeI. Detect optical signals
B. LEDII. Voltage Regulator
C. RectifierIII. Remote Control
D. PhotodiodeIV. AC to DC

Choose the correct answer from the options given below:

सूची I को सूची II से सुमेलित कीजिए:

सूची I
युक्ति
सूची II
अनुप्रयोग
A. जेनर डायोडI. प्रकाशिक संकेतों का संसूचन
B. एलईडी (LED)II. वोल्टता नियंत्रक (वोल्टेज रेगुलेटर)
C. दिष्टकारी (रेक्टिफायर)III. रिमोट कंट्रोल
D. फोटोडायोडIV. AC को DC में बदलना

नीचे दिए गए विकल्पों में से सही उत्तर का चयन कीजिए:

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 02-07-2023 Shift 3 Match the Following +5 / −1
11
When a forward bias is applied to a p-n junction diode, then :
जब किसी p-n संधि डायोड पर अग्र अभिनति (फॉरवर्ड बायस) लगाई जाती है, तो :
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 18-08-2022 Shift 1 MCQ (Single Correct) +5 / −1
12
Match List - I with List - II.

List - I
Electronic device
List - II
Use/Application
A) PhotodiodeI)Remote controls
B) Zener diodeII)Amplifier
C) Light emitting diodeIII)Voltage regulator
D) TransistorIV)Photo detector

Choose the correct answer from the options given below :

सूची - I को सूची - II से सुमेलित कीजिए।

सूची - I
इलेक्ट्रॉनिक युक्ति
सूची - II
उपयोग/अनुप्रयोग
A) फोटोडायोडI)रिमोट कंट्रोल
B) ज़ेनर डायोडII)प्रवर्धक
C) प्रकाश उत्सर्जक डायोडIII)वोल्टता नियामक
D) ट्रांजिस्टरIV)प्रकाश संसूचक

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 18-08-2022 Shift 1 Match the Following +5 / −1
13

Read the following statements with reference to electronic devices.

(A) A transistor is used as a rectifier
(B) A zener diode is used as a voltage regulator
(C) A NOT gate is a universal gate
(D) A transistor is used as an amplifier
(E) A photodiode is used as an oscillator

Choose the correct answer from the options given below :

इलेक्ट्रॉनिक युक्तियों के संदर्भ में निम्नलिखित कथनों को पढ़िए।

(A) ट्रांजिस्टर का उपयोग दिष्टकारी के रूप में किया जाता है
(B) ज़ेनर डायोड का उपयोग वोल्टता नियामक के रूप में किया जाता है
(C) NOT गेट एक सार्वत्रिक गेट है
(D) ट्रांजिस्टर का उपयोग प्रवर्धक के रूप में किया जाता है
(E) फोटोडायोड का उपयोग दोलित्र के रूप में किया जाता है

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 18-08-2022 Shift 1 MCQ (Single Correct) +5 / −1
14

Match List - I with List - II.

I-V Characteristics of Diodes

Choose the correct answer from the options given below :

सूची - I को सूची - II से सुमेलित कीजिए।

डायोडों के I-V अभिलाक्षणिक वक्र

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 18-08-2022 Shift 1 Match the Following +5 / −1
15

Choose the logic operation carried out by the following circuit :

Logic Gate Circuit

निम्नलिखित परिपथ द्वारा संपन्न होने वाले तार्किक प्रचालन (लॉजिक ऑपरेशन) का चयन कीजिए :

लॉजिक गेट परिपथ
Semiconductor Electronics अर्धचालक इलेक्ट्रॉनिकी CUET UG Physics 18-08-2022 Shift 1 MCQ (Single Correct) +5 / −1
16
The height of a TV tower is $180\,\text{m}$. To what distance the transmission can be made from this tower, if the radius of Earth is $6.4 \times 10^6\,\text{m}$?
एक टीवी टॉवर की ऊंचाई $180\,\text{m}$ है। इस टॉवर से कितनी दूरी तक प्रसारण किया जा सकता है, यदि पृथ्वी की त्रिज्या $6.4 \times 10^6\,\text{m}$ है?
Communication Systems संचार व्यवस्था CUET UG Physics 02-07-2023 Shift 3 Numerical +5 / −1
17
Match List I with List II:

List I
Term
List II
Definition/Role
A. ModulationI. Retrieval of information from the carrier wave at the receiver
B. Baseband signalsII. Frequency range over which an equipment operates
C. DemodulationIII. Superimposition of a signal on a high frequency wave
D. BandwidthIV. Band of frequencies representing the original signal

Choose the correct answer from the options given below:

सूची I को सूची II से सुमेलित कीजिए:

सूची I
पद
सूची II
परिभाषा/भूमिका
A. मॉडुलनI. अभिग्राही (रिसीवर) पर वाहक तरंग से सूचना की पुनःप्राप्ति
B. मूलबैंड (बेसकैंड) संकेतII. वह आवृत्ति परास जिस पर कोई उपकरण कार्य करता है
C. विमॉडुलन (डीमॉडुलन)III. एक उच्च आवृत्ति तरंग पर संकेत का अध्यारोपण
D. बैंड-चौड़ाई (बैंडविड्थ)IV. मूल संकेत का प्रतिनिधित्व करने वाली आवृत्तियों का बैंड

नीचे दिए गए विकल्पों में से सही उत्तर का चयन कीजिए:

Communication Systems संचार व्यवस्था CUET UG Physics 02-07-2023 Shift 3 Match the Following +5 / −1
18
The process of superimposing message signal with the carrier wave is known as :
वाहक तरंग के साथ संदेश संकेत को अध्यारोपित करने की प्रक्रिया क्या कहलाती है :
Communication Systems संचार व्यवस्था CUET UG Physics 18-08-2022 Shift 1 MCQ (Single Correct) +5 / −1
19

For a generalised communication system, arrange the following in the correct sequence :

(A) Receiver
(B) Information source
(C) Channel
(D) User of information
(E) Transmitter

Choose the correct answer from the options given below :

एक सामान्य संचार तंत्र के लिए निम्नलिखित को सही क्रम में व्यवस्थित कीजिए :

(A) अभिग्राही (रिसीवर)
(B) सूचना स्रोत
(C) चैनल (माध्यम)
(D) सूचना का उपयोगकर्ता
(E) प्रेषित्र (ट्रांसमीटर)

नीचे दिए गए विकल्पों में से सही उत्तर चुनिए :

Communication Systems संचार व्यवस्था CUET UG Physics 18-08-2022 Shift 1 MCQ (Single Correct) +5 / −1

Syllabus Chapters Breakdown पाठ्यक्रम अध्याय विभाजन

2 Chapters 2 अध्याय
Official PYQ Papers

Previous Year Papers of Physics

Practice official shift-wise question papers with answer keys and detailed explanations on the actual exam pattern.

4
Total Available Previous Papers

Choose Exam

Exam Directory

Browse official Previous papers and mock tests

10 Major Agriculture Exams Available