A two stroke cycle gives the number of power strokes as compared... | Agrigyan

Detailed Comparison between CI and SI Engines:

• Statement (A) is True: Due to substantially higher compression ratios (14:1 to 22:1 in CI vs 6:1 to 10:1 in SI) and peak cylinder pressures, CI engine components (cylinder block, piston, connecting rod, crankshaft) must be structurally heavier and more robust, making CI engines bulkier.
• Statement (B) is True: Higher compression ratios enable CI engines to operate at significantly higher thermal efficiencies (35–40% in CI vs 25–30% in SI).
• Statement (C) is False: CI engines experience larger turning moment fluctuations between power strokes and compression strokes due to high peak pressures, requiring a HEAVIER (not lighter) flywheel to smooth operation.

Detailed Step-by-Step Calculation:

• Definition of Volumetric Efficiency ($\eta_v$):
  $$\eta_v = \frac{\text{Actual volume of mixture drawn in during suction stroke}}{\text{Swept volume (Piston displacement volume)}}$$
  $$\eta_v = \frac{V_a}{V_s}$$
  Where:
  $V_s = \text{Swept volume} = 300\text{ cm}^3$
  $\eta_v = 0.80$
• Calculation of Actual Suction Volume ($V_a$):
  $$V_a = \eta_v \times V_s = 0.80 \times 300\text{ cm}^3 = 240\text{ cm}^3$$
  (Note: Clearance volume and mechanical efficiency are extraneous information not required for suction volume calculation).

Detailed Analysis of Indian Agricultural Mechanization:

• National Mechanization Status (Option 2): According to the Ministry of Agriculture & Farmers Welfare, ICAR, and NABARD surveys, the overall level of farm mechanization in India is currently estimated at $40\text{--}45\%$.
• Operation-Wise Breakdown: Land preparation/tillage is mechanized up to $60\text{--}70\%$, harvesting and threshing up to $30\text{--}40\%$, sowing/planting at $20\text{--}30\%$, and intercultural/weeding operations at less than $15\%$, averaging out to an overall mechanization index of $40\text{--}45\%$. In comparison, countries like the USA, Japan, and Western Europe exceed $90\%$.